I have a 1993 (K reg) 405 Mk2 STDT & the heater is blowing cold air all time. I have checked the matrix pipes below the glovebox and there both cold. I have drained the system and refilled as per the haynes manual bleeding at the thermostat housing and top of the raditor and also used a cut bottle and put it into the top of the radiator to keep the system topped up. I cant find any bleed vavle on the pipes at the back of the engine leading to the Matrix. I can understand this, as the haynes manual says there is one?
The pipes at the back of the engine leading to the matrix feel like they dont have water in them at all. Could this be an air lock that is causing the matrix pipes not to heat up or could some please help with an answer of what the problem might be.
Any help wound be very gratfully as its cold in my car all time..
+ Reply to Thread
Results 1 to 3 of 3
-
12-19-2007 05:10 PM #1
"Help" 405 Heater Blowing Cold Air
-
12-20-2007 10:13 PM #2
Come on anyone!!!!!!!!!!
-
12-23-2007 05:37 PM #3Junior Member
- Join Date
- Nov 2006
- Location
- Utrecht, Netherlands
- Posts
- 16
maybe the people at http://forum.405Mi16.com can help you?
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts